16.10. — 18.10.2018 — IN(3D)USTRY  in Barcelona

Our net­work sup­ports the third edi­tion of the largest trade fair for addi­tive man­u­fac­tur­ing in the Mediter­ranean region as a part­ner. Our mem­bers receive spe­cial con­di­tions for this. If you are inter­est­ed, please con­tact Ste­fanie Brick­wede.

IN(3D)USTRY in Barcelona Explore the infinite possibilities of the Additive & Advanced Manufacturing

Robot­ics, moulds and dies, plas­tics and new mate­ri­als will be on dis­play togeth­er with 3D print­ing at the third IN(3D)USTRY fair, titled From Needs to Solu­tions. The pur­pose of the event is to pro­mote the use of this tech­nol­o­gy through­out the indus­try and, for this rea­son, this year’s event incor­po­rates new sec­tors as poten­tial future users of addi­tive man­u­fac­tur­ing. Orga­nized by Fira de Barcelona, IN(3D)USTRY will be held from 16 to 18 Octo­ber in Hall 8 at the Mon­tjuïc venue. The third IN(3D)USTRY fair, titled From Needs to Solu­tions, extends its influ­ence over the indus­tri­al ecosys­tem by increas­ing the num­ber of sec­tors attend­ing. In this regard, the event will fea­ture five the­mat­ic areas (advanced man­u­fac­tur­ing, moulds and dies, new mate­ri­als, plas­tics and 3D print­ing), based upon which the con­tent of the event will be devel­oped. Thus, with­in a sin­gle space, the event will include sev­er­al pre­vi­ous­ly absent indus­tries which could poten­tial­ly employ 3D print­ing. The advanced man­u­fac­tur­ing area will incor­po­rate the field of robot­ics applied to the indus­tri­al sec­tor. The moulds and dies area will explore how 3D print­ing can con­tribute to reduc­ing costs in this sub-sec­tor. And the new mate­ri­als area will address the huge pos­si­bil­i­ties open­ing up with the use of inno­v­a­tive plas­tic and metal­lic com­po­nents. The event will be struc­tured around the IN(3D)USTRY Are­na, a large area for inno­va­tion con­tain­ing a stage where sev­er­al rep­re­sen­ta­tives of com­pa­nies which are already apply­ing 3D print­ing to their pro­duc­tion process­es will explain their expe­ri­ences to the vis­i­tors. These will be com­pa­nies in sec­tors such as aero­nau­tics, health, indus­try, cars and retail. There will also be an exhi­bi­tion area dis­play­ing numer­ous exam­ples of parts man­u­fac­tured by means of this inno­v­a­tive tech­nol­o­gy, as well as the pres­ence of man­u­fac­tur­ers show­cas­ing their lat­est inno­va­tions in the field of cut­ting-edge print­ers. Miquel Ser­ra­no, the event’s direc­tor, declares that “the incor­po­ra­tion of new sec­tors into this year’s fair will enable us to expand the spec­trum of addi­tive man­u­fac­tur­ing and view the enor­mous pos­si­bil­i­ties offered by this tech­nol­o­gy in many indus­tri­al sec­tors. By group­ing togeth­er all the pro­duc­tion tech­niques which com­ple­ment addi­tive man­u­fac­tur­ing we will dis­play the entire pro­duc­tion and val­ue chain.” Accord­ing to Ser­ra­no, “three years after its launch, IN(3D)USTRY is now the lead­ing fair in Spain and this year, its third, it will also enable us to estab­lish our­selves as the pri­ma­ry bench­mark in South­ern Europe.” Barcelona Indus­try Week IN(3D)USTRY, From Needs to Solu­tions, forms part of Barcelona Indus­try Week, which also encom­pass­es the IoT Solu­tions World Con­gress, the world’s lead­ing event in the Inter­net of Things indus­try, and Healthio, spe­cial­iz­ing in health and san­i­tary care tech­nolo­gies. The three events, which share syn­er­gies and pro­vide a plat­form for trade and knowl­edge in sev­er­al indus­tri­al sec­tors, will be held from 16 to 18 Octo­ber at Fira de Barcelona. More: http://www.in3dustry.com/en/2018-edition

10.10.2018 — Berlin Urban Tech Summit

BERLINDUSTRIES leads the way: true to this mot­to, this year’s “Berlin Urban Tech Sum­mit” focus­es on Berlin’s indus­try on the thresh­old of the dig­i­tal era.

Get the lat­est infor­ma­tion on top­ics such as dig­i­tal trans­for­ma­tion process­es and robo­t­i­za­tion, but also on chang­ing job mar­kets and oth­er socio-polit­i­cal issues.

Urban tech indus­try experts meet CEOs, politi­cians and rep­re­sen­ta­tives of asso­ci­a­tions, cham­bers and trade unions. Look for­ward to top-notch speak­ers, inno­v­a­tive pre­sen­ta­tions and inter­est­ing dis­cus­sions.

More infor­ma­tion about the pro­gram and the speak­ers:

www.BerlinUrbanTech.com

Mobil­i­ty goes Addi­tive will have a booth at this event. If you are inter­est­ed in sup­port­ing us, please do not hes­i­tate to con­tact us.

09.10. — 10.10.2018 — Construction Equipment Forum, Hannover

On 9 and 10 Octo­ber 2018, the Insti­tute for Pro­duc­tion Man­age­ment will host the Con­struc­tion Equip­ment Forum 2018, the main top­ic of the con­fer­ence with accom­pa­ny­ing exhi­bi­tion: Con­struc­tion Machin­ery of the Future: The Inno­va­tion Agen­da 2025.

a) alter­na­tive dri­ves

b) Digi­ti­sa­tion of the con­struc­tion site

c) automa­tion and

d) increas­ing com­pe­ti­tion

The found­ing part­ners of the con­fer­ence are the Wack­er Neu­son Group, Robert Bosch GmbH and the Ammann Group. The con­fer­ence will bring togeth­er deci­sion-mak­ers from cus­tomers, sup­pli­ers and sup­pli­ers to dis­cuss com­mon issues for the direc­tion of the con­struc­tion indus­try of the future. In the accom­pa­ny­ing exhi­bi­tion, lead­ing OEMs, ani­mal sup­pli­ers, tech­nol­o­gy and soft­ware providers will show­case their inno­va­tions for the con­struc­tion machines of the future.

Among oth­ers the fol­low­ing deci­sion mak­ers will be present with speech­es: Mar­tin Lehn­er, CEO, Wack­er Neu­son SE, Klaus Graner, Man­ag­ing Direc­tor, Lieb­herr-
Com­po­nents Bib­er­ach GmbH, Mar­tin Knoet­gen, CEO, SANY Europe, Dr. Anton Demarmels, Head of Tech­nol­o­gy Man­age­ment, Ammann Schweiz AG, Dr. Johannes-Joerg Rueger, Pres­i­dent of the Com­mer­cial Vehi­cle and Off-Road Divi­sion, Robert Bosch GmbH or Dr. Markus Schwader­lapp, Senior Vice Pres­i­dent Research and Devel­op­ment, Deutz AG.

Con­fer­ence pro­gramme : An overview of all con­firmed speak­ers includ­ing lec­ture titles and oth­er ses­sions can be found online.

At this event, Mrs. Brick­wede will par­tic­i­pate in a work­shop as an expert on 3D print­ing of spare parts. Mobil­i­ty goes Addi­tive will have a booth at the accom­pa­ny­ing exhi­bi­tion.

More about the event can be found here:

https://www.constructionforum.de/

Discount:

[is-login]

Reg­is­tra­tion with 20% dis­count:

www.constructionforum.de/anmelden/

(Dis­count code: CEF18COOP2 in the last step
and con­firm, cor­rect­ed price dis­played)

[/is-login]

26.09.2018 — Annual Meeting of Mobility goes Additive

The third edi­tion of our Annu­al Meet­ing will be some­thing very spe­cial. We would like to take the oppor­tu­ni­ty to inau­gu­rate the new premis­es of the Mobil­i­ty goes Addi­tive e.V. office togeth­er with you.
We invite you to vis­it the cam­pus of Berlin’s Marien­park on Sep­tem­ber 26, 2018!

  • keynotes from Sauber Motor­sports, Deutsches Herzzen­trum Berlin, Deutsche Bahn, …
  • reports from the work­ing groups
  • pre­sen­ta­tions of select­ed projects
  • inter­ac­tive for­mats
  • renowned experts as guests
  • pos­si­bil­i­ty to rep­re­sent your com­pa­ny with a booth

And, of course, the net­work­ing should not be too short; we have planned gen­er­ous breaks and an evening event with din­ner.

More about our event and tick­et­ing:

https://mobilitygoesadditive.com/en/annual-meeting-2018–2/

19.09. — 20.09.2018 — Additive Manufacturing in Aerospace — AMA

Our net­work part­ners of ISEMP at the Uni­ver­si­ty of Bre­men are orga­niz­ing the AMA Con­fer­ence “Addi­tive Man­u­fac­tur­ing in Aero­space” in Bre­men in Sep­tem­ber. Focus 2018: Chal­lenges in AM series pro­duc­tion

(Our net­work mem­bers ben­e­fit from a 10% dis­count if they par­tic­i­pate. Please con­tact Ste­fanie Brick­wede if you are inter­est­ed.)

Addi­tive Man­u­fac­tur­ing in Aero­space (AMA) 2018 is a cut­ting-edge forum pre­sent­ing the newest
devel­op­ments in the field of addi­tive man­u­fac­tur­ing. Focus­ing on the aero­space indus­try the
sym­po­sium also intends to pro­mote the exchange of expe­ri­ences between dif­fer­ent indus­tries
(auto­mo­tive, pow­er, etc.) and appli­ca­tion-ori­ent­ed research insti­tutes.
Spe­cial focus for 2018 will be on chal­lenges in ser­i­al pro­duc­tion of metal­lic AM parts. The
pre­sen­ta­tions are going to address well-estab­lished man­u­fac­tur­ing meth­ods such as pow­der-bed
met­al and emerg­ing meth­ods like direct met­al depo­si­tion.

The pro­gram is struc­tured into 6 ses­sions and a pan­el dis­cus­sion:

Wednes­day, Sep­tem­ber 19th:
Ses­sion 1 — Process Chain for AM Ser­i­al Pro­duc­tion
Ses­sion 2 — AM Relat­ed Light-weight Design
Ses­sion 3 — Part Test­ing and Qual­i­ty Assur­ance
Pan­el Dis­cus­sion — Chal­lenges of AM Ser­i­al Pro­duc­tion

Thurs­day, Sep­tem­ber 20th
Ses­sion 4 — High Pro­duc­tion Rate AM Tech­nolo­gies
Ses­sion 5 — Oral Poster Pre­sen­ta­tions
Ses­sion 6 — Data Han­dling and Sim­u­la­tion-dri­ven Solu­tions

For fur­ther details regard­ing the sched­ule, pre­sen­ta­tion- and poster top­ics please vis­it our web­site:
www.ama-conference.eu

Network News 08/2018: AM2018 — three weeks to go — only few seats left — and more…

Dear MgA-Com­mu­ni­ty,

Only three weeks to go – we are look­ing for­ward to see­ing you at our Annu­al Meet­ing 2018! We look for­ward to wel­com­ing Ronen Hadar from Lego as one of our keynote speak­ers. Lego, expe­ri­enced in the addi­tive pro­duc­tion of pro­to­types for years, is cur­rent­ly enter­ing new use cases.Hear more about it on 26 Sep­tem­ber! 
The Annu­al Meet­ing is the best oppor­tu­ni­ty to wel­come and meet our 8 new mem­bers in per­son:

XERION BERLIN LABORATORIES GmbH, found­ed 18 years ago, spe­cial­izes in high-tech fur­nace sys­tems for pro­duc­tion and research. With this exper­tise, they devel­oped the Fusion Fac­to­ry, a machine that com­bines the entire pro­duc­tion line of FFF met­al print­ing.

The Bun­deswehr Research Insti­tute for Mate­ri­als, Fuels and Lubri­cants (WIWeB) is under the Fed­er­al Office for Equip­ment, Infor­ma­tion Tech­nol­o­gy and Use of the Bun­deswehr and deals with research, analy­sis and mate­ri­als test­ing.

The Leicht­bau-Zen­trum Sach­sen GmbH (LZS) was found­ed in 2003. Today, it is one of Germany’s lead­ing devel­op­ment part­ners in the field of “func­tion­al­ly inte­grat­ed light­weight sys­tem con­struc­tion in mul­ti-mate­r­i­al design”.

JSC Tech­nol­o­gy GmbH offers inte­grat­ed solu­tions for the dig­i­tal infra­struc­ture of mod­ern indus­try. This includes not only the equip­ment with hard­ware or soft­ware, but also the orga­ni­za­tion­al devel­op­ment and train­ing of the employ­ees.

The Tech­nis­che Uni­ver­sität Ilme­nau is a uni­ver­si­ty of the State of Thuringia in the Goethe and uni­ver­si­ty town Ilme­nau.

The Lab­o­ra­to­ry of Pro­duc­tion Engi­neer­ing is part of the Fac­ul­ty of Mechan­i­cal Engi­neer­ing of the Hel­mut-Schmidt-Uni­ver­si­ty / Uni­ver­si­ty of the Bun­deswehr Ham­burg.

AMEXCI AB is a joint ven­ture com­pa­ny start­ed on the ini­tia­tive of Dr. Mar­cus Wal­len­berg and eleven of Swe­dens largest indus­tri­al cor­po­ra­tions. AMEXCI was found­ed on the prin­ci­ple of accel­er­at­ing the indus­tri­al intro­duc­tion of addi­tive man­u­fac­tur­ing and bring­ing a new gen­er­a­tion of inno­v­a­tive engi­neers and prod­ucts to the mar­ket in dif­fer­ent indus­try sec­tors.

Wel­come to the net­work and to a good coop­er­a­tion!
Cur­rent overview of mem­bers: www.mobilitygoesadditive.com/en/members/.
A click on the logos leads you direct­ly to the respec­tive com­pa­ny home­pages.


26.09.2018

09.00 — 10.30 
Mem­ber Assem­bly

11.00 — Open End
Annu­al Meet­ing 2018

Are you already in?

On a dai­ly basis, we are receiv­ing reg­is­tra­tions for our Annu­al Meet­ing. So if you haven’t reg­is­tered yet, the time to do it is now as rows are fill­ing up and seats are lim­it­ed!
Please reg­is­ter even if you only want to attend the gen­er­al meet­ing and make use of your vot­ing rights. This makes plan­ning con­sid­er­ably eas­i­er for us.

event page

An overview of the event with cur­rent agen­da, the event tick­et of Deutsche Bahn and impres­sions of our last events.


At the Annu­al Meet­ing, all work­ing group lead­ers will report on their work, present results and be avail­able for dis­cus­sion.
fur­ther work­ing group dates

Approval 13.12.18
Lead: Max­i­m­il­ian Kunkel, Siemens AG

Legal Frame­works 20.09.18 by tel­co
Lead: Dr. Andreas Leupold, Leupold Legal

Change Man­age­ment prob­a­bly in Novem­ber
Lead: Oliv­er Cyna­mon, FIT AG

Mate­ri­als begin­ning of 2019
Lead: Dr. Tina Schling­mann, Deutsche Bahn AG


Within the network

New mem­ber of the Orga-Team

With Linus Till­mann we have been able to win a high­ly moti­vat­ed employ­ee for the organ­i­sa­tion team in Berlin. He is cur­rent­ly doing his Mas­ter in Mechan­i­cal Engi­neer­ing at the TU Berlin and has been sup­port­ing the work in the net­work for more than a year. Now, in Sep­tem­ber, he will move from the rail­way to our asso­ci­a­tion in order to con­cen­trate ful­ly on the organ­i­sa­tion­al work and the­mat­ic sup­port of the work­ing groups.
A warm wel­come to you!




events

Addi­tive Man­u­fac­tur­ing in Aero­space — AMA
The net­work mem­bers of the ISEMP at the Uni­ver­si­ty of Bre­men are orga­niz­ing the AMA Con­fer­ence “Addi­tive Man­u­fac­tur­ing in Aero­space” from Sep­tem­ber 19 — 20, 2018 in Bre­men.
Focus 2018: Chal­lenges in AM series pro­duc­tion

Pan­el dis­cus­sion MgA — Deutsche Bahn at the Inno­Trans
If you were inter­est­ed in the lead­ing trade fair for trans­port tech­nol­o­gy Inno­Trans in Berlin any­way, make sure to drop by on the third day! On 20.09.2018 between 11.00 and 11.30 a pan­el dis­cus­sion on 3D print­ing in coop­er­a­tion with Mobil­i­ty goes Addi­tives with high-rank­ing par­tic­i­pants will take place at the cen­tral Deutsche Bahn exhi­bi­tion stand in the City Cube!
Par­tic­i­pa­tion is free of charge for trade fair vis­i­tors.

further dates

inside the net­work

10.09.2018 — board meet­ing (not pub­lic)

26.09.2018 — Annu­al Meet­ing 2018

out­side

07.09.18 – FUSIONFACTORY: Open day at Xeri­on Berlin Lab­o­ra­to­ries mehr

12.09.18 – 13.09.18 - Forum Deutsch­er Mit­tel­stand with Keynote from Ste­fanie Brick­wede mehr

12.09.2018 – Forum Addi­tive Fer­ti­gung at LZH

18 — 23.09.2018 — Between 18 and 21 Sep­tem­ber, hun­dreds of exhibitors will once again be pre­sent­ing them­selves to trade vis­i­tors at Inno­Trans, the lead­ing trade fair for trans­port tech­nol­o­gy, in all 41 halls and on the entire open-air exhi­bi­tion grounds of the Messe Berlin. On the fol­low­ing two days it will open up to a larg­er audi­ence.
A fly­er from the net­work is planned to give an overview of the net­work mem­bers exhibit­ing at the fair. If you are inter­est­ed in the fly­er, please con­tact us!

19.09. – 20.09.2018 – Addi­tive Man­u­fac­tur­ing in Aero­space – AMA mehr

09.10. — 10.10.2018 — Con­struc­tion Equip­ment Forum, Han­nover mehr

16.10.- 18.10.2018IN(3D)USTRY in Barcelona. Our net­work sup­ports the third edi­tion of the largest trade fair for addi­tive man­u­fac­tur­ing in the Mediter­ranean region as a part­ner. Our mem­bers receive spe­cial con­di­tions for this. If you are inter­est­ed, please con­tact Ste­fanie Brick­wede.

We would also be hap­py to draw atten­tion to your spe­cial events. Please con­tact our Team­for more infor­ma­tion. We are look­ing for­ward to see­ing you again soon, maybe at one of the events, and we will be broad­cast­ing until then.

Best regards, your
Mobil­i­ty goes Addi­tive Orga-Team

Network News 07/2018: Annual Meeting 2018 — book a place now!

Dear MgA-Community,

like the cur­rent sum­mer, the prepa­ra­tions for our Annu­al Meet­ing 2018 are now enter­ing the hot phase. There­fore, we use this newslet­ter to pro­vide you with the rel­e­vant infor­ma­tion on sched­ule, book­ing and hotels in good time.
In addi­tion, there is infor­ma­tion on the new­ly launched Mate­ri­als work­ing group and news from the association’s office.

Cur­rent overview of mem­bers: www.mobilitygoesadditive.com/en/members/. A click on the logos leads you direct­ly to the respec­tive com­pa­ny home­pages.


26.09.2018

09.00 — 10.30
Gen­er­al Meet­ing

11.00 — Open End
Annu­al Meet­ing 2018

Im Marien­park, Berlin
Annu­al Meet­ing 2018

For those who stay — it’s worth it! Because there is a lot offered!
The fol­low­ing is an open and excit­ing pro­gram with many oppor­tu­ni­ties to net­work and get to know our new mem­bers.

We track all atten­dees about the net­work top­ics and suc­cess­es. The work­ing group lead­ers present their results and are open for dis­cus­sion.

What’s the news? That”s what report­ed by our speak­ers from var­i­ous indus­tries:
Christoph Hansen, Sauber Engi­neer­ing / For­mu­la 1 rac­ing team
Prof. Dr. Sabi­na Jeschke, Chief Tech­nol­o­gy and Dig­i­ti­za­tion Offi­cer DB AG
State Sec­re­tary Rick­erts, Sen­ate Berlin, with his vision of a 3D print­ing cap­i­tal

And you will be there when Mobil­i­ty goes Addi­tive opens the new premis­es of its office in the Berlin 3D Print­ing Hub!

Atten­tion — for the Annu­al Meet­ing: First come, first serve!
Secure your place ear­ly via the book­ing page.

News

EU Par­lia­ment wants to face legal chal­lenges of 3D print­ing with new leg­is­la­tion
The Euro­pean Par­lia­ment has recent­ly adopt­ed a deci­sion on 3D print­ing and the chal­lenges it pos­es to intel­lec­tu­al prop­er­ty and civ­il lia­bil­i­ty and pub­lished a report on this (2017/2007(INI)).
More about this from our advi­so­ry coun­cel­lor Dr. Andreas Leupold LL.M under the fol­low­ing link.


On July 9, 2018, the kick-off meet­ing of our new Mate­ri­als work­ing group took place above the roofs of the city at Berlin’s main sta­tion. We would like to thank every­one who made this start a suc­cess. Derived from the par­tic­i­pants’ areas of inter­est, the event ini­tial­ly iden­ti­fied six focus groups with the fol­low­ing work­ing titles:

  • High Per­for­mance Poly­mers
  • Elas­tomer Prinit­ing
  • met­al devel­op­ment
  • Spec­i­fi­ca­tion, Qual­i­fi­ca­tion, Guide­lines
  • Mar­ket Needs
  • Test­ing Method Stan­dards

There will be a sta­tus report at the Annu­al Meet­ing 2018.

Lead: Dr. Tina Schling­mann, Deutsche Bahn AG

fur­ther work­ing group dates

Edu­ca­tion 08.08.18 in Berlin
Lead: Olaf Stein­meier, Fraun­hofer IAPT

Approval 21.08.18 in Berlin
Lead: Max­i­m­il­ian Kunkel, Siemens AG

Dig­i­tale Sup­ply Chain & IT mid-August, vote in progress
Lead: Stef­fen Kuhn, EOS GmbH

Legal Frame­works 20.09.18 Con­fer­ence Call
Lead: Olaf Stein­meier, Fraun­hofer IAPT

Change Man­age­ment in Sep­tem­ber
Lead: Oliv­er Cyna­mon, FIT AG


within the network

finan­cial audit
Our books were audit­ed in detail by the tax office in July for the first time and passed in all respects the crit­i­cal scruti­ny of the audi­tors.
Thanks to Frie­da Gripp, our finan­cial expert, for the great work!
lawyer for the net­work
We were also able to secure the legal sup­port of Mr. Ste­fan Nau from the Berlin law firm SEGELKEN & SUCHOPAR for the future.


further dates

26.09.2018 — Annu­al Meet­ing 2018

18 — 23.09.2018 — Between 18 and 21 Sep­tem­ber, hun­dreds of exhibitors will once again be pre­sent­ing them­selves to trade vis­i­tors at Inno­Trans, the lead­ing trade fair for trans­port tech­nol­o­gy, in all 41 halls and on the entire open-air exhi­bi­tion grounds of the Messe Berlin. On the fol­low­ing two days it will open up to a larg­er audi­ence.
A fly­er from the net­work is planned to give an overview of the net­work mem­bers exhibit­ing at the fair. If you are inter­est­ed in the fly­er, please con­tact us!

16. — 18.10.2018IN(3D)USTRY in Barcelona. Our net­work sup­ports the third edi­tion of the largest trade fair for addi­tive man­u­fac­tur­ing in the Mediter­ranean region as a part­ner. Our mem­bers receive spe­cial con­di­tions for this. If you are inter­est­ed, please con­tact Ste­fanie Brick­wede.

We are look­ing for­ward to see­ing you again soon, maybe at one of the events, and we will be broad­cast­ing until then.

Best regards, your
Mobil­i­ty goes Addi­tive Orga-Team

Network News 06/2018: New business year, Annual Meeting 2018 — Tickets available

Dear Members,

Our sec­ond busi­ness year ends and we can look back on a suc­cess­ful year thanks to joint work. 75 com­pa­nies are cur­rent­ly work­ing in our net­work on the estab­lish­ment and series pro­duc­tion readi­ness of addi­tive man­u­fac­tur­ing in indus­tri­al pro­duc­tion!
Five new mem­ber com­pa­nies will join this group at the begin­ning of the new busi­ness year:

The Israeli start­up LEO Lane offers its own ecosys­tem for the man­age­ment, con­trol and secure use of your own print data.

Tren­i­talia, Italy’s largest rail­way com­pa­ny, was cre­at­ed in 2000 by sep­a­rat­ing the freight and pas­sen­ger trans­port busi­ness from the par­ent com­pa­ny Fer­rovie del­lo Sta­to Ital­iane (FS).

O.R. Lasertech­nolo­gie GmbH from Dieburg, Ger­many, has been deal­ing with inno­v­a­tive con­cepts in laser tech­nol­o­gy for more than 20 years and sup­plies its own indus­tri­al laser sys­tems all over the world.

Faive­ley Trans­port is a French provider of rail sys­tems and ser­vices with head­quar­ters near Paris and loca­tions in 26 coun­tries. The com­pa­ny belongs to the Amer­i­can Wabtec Cor­po­ra­tion, which sup­plies loco­mo­tives and rail vehi­cle com­po­nents and is expect­ed to merge with GE Trans­porta­tion in 2019.

The team of Indus­tri­al Part­ners GmbH from Frank­furt am Main, Beer­felden im Oden­wald and Tian­jin, P.R. Chi­na devel­ops and designs indi­vid­ual com­po­nents, sub­sys­tems and prod­ucts for var­i­ous indus­tri­al sec­tors. It sup­ports its cus­tomers from the idea to the series part, even with the cor­rect use of addi­tive pro­duc­tion.

Wel­come to the net­work and on a good coop­er­a­tion!

Cur­rent overview of mem­bers: www.mobilitygoesadditive.com/en/members/. A click on the logos leads you direct­ly to the respec­tive com­pa­ny home­pages.



The new Mate­ri­als work­ing group will start on 9 July in Berlin.

Lead: Dr. Tina Schling­mann, Deutsche Bahn AG

further working group dates

Approval 21.08.18 in Berlin
Lead: Max­i­m­il­ian Kunkel, Siemens AG

Change Man­age­ment 05.07.18
Lead: Oliv­er Cyna­mon, FIT AG

Dig­i­tale Sup­ply Chain & IT mid-August, vote in progress
Lead: Stef­fen Kuhn, EOS GmbH

Edu­ca­tion 08.08.18 in Berlin
Lead: Olaf Stein­meier, Fraun­hofer IAPT


within the network

Advi­so­ry Board
Due to Stef­fen Kuhn’s change to EOS and the avoid­ance of dom­i­nance by a com­pa­ny, Niko­lai Zaeper­nick leaves the net­work advi­so­ry board. We would like to thank Niko­lai for his work since the foun­da­tion of the net­work!
We will con­tin­ue to work close­ly with EOS on the Net­work Advi­so­ry Board with Stef­fen Kuhn.

Annu­al Meet­ing 2018
Our Annu­al Meet­ing in the net­work is com­ing up! On 26.09.2018 we meet in Berlin.
The gen­er­al meet­ing will be fol­lowed by an excit­ing net­work­ing pro­gramme that is open to every­one and will once again pro­vide an all-round overview of the net­work top­ics and suc­cess­es, pro­vide new inspi­ra­tion and get to know our new mem­bers.

What has hap­pened in the work­ing groups?
-Direct dis­cus­sion in an inter­ac­tive mar­ket stand con­cept with the work­ing group lead­ers

What’s the news?
-Be informed about cur­rent devel­op­ments even before Form­next, e.g. by Desk­top­Met­al Print­ing to reduce post­pro­cess­ing effort

-Get to know com­plete­ly new appli­ca­tions, e.g. wheelset bear­ing caps print­ed with 3DMP

-A look beyond the end of one’s nose: How far is the pres­sure of human spare parts? From heart valves to tis­sue print­ing — a real­is­tic insight

-Every­one is talk­ing about digi­ti­sa­tion and it is being imple­ment­ed in Europe’s largest mobil­i­ty and logis­tics group by her: Prof. Dr. Sabi­na Jeschke, Direc­tor of Tech­nol­o­gy and Dig­i­ti­za­tion at Deutsche Bahn, reports on the dig­i­ti­za­tion of Deutsche Bahn and what role 3D print­ing plays in it

-Berlin brings indus­try back: State Sec­re­tary for Eco­nom­ic Affairs of Berlin, Chris­t­ian Rick­erts, for­mer head of Wikipedia, reveals his vision of 3D print­ing in the cap­i­tal

-And you’ll be there when Mobil­i­ty goes Addi­tive cel­e­brates its entry into the 3D print­ing hub — with jazz quar­tet and DJ — until ear­ly in the morn­ing!


events

CECIMO Brus­sels
Last week, rep­re­sen­ta­tives of the 3D print­ing indus­try met at the Euro­pean Par­lia­ment in Brus­sels at the invi­ta­tion of CECIMO. Togeth­er with excel­lent­ly informed par­lia­men­tar­i­ans, rel­e­vant reg­u­la­to­ry require­ments were dis­cussed. The main top­ics were stan­dards, legal frame­work con­di­tions, edu­ca­tion and their con­sid­er­a­tion in the new EU fund­ing pro­gramme “Hori­zons Europe”, which will replace the exist­ing “Hori­zons 2020”.

further dates

out­side

18 — 23.09.2018 — Between 18 and 21 Sep­tem­ber, hun­dreds of exhibitors will once again be pre­sent­ing them­selves to trade vis­i­tors at Inno­trans, the lead­ing trade fair for trans­port tech­nol­o­gy, in all 41 halls and on the entire open-air exhi­bi­tion grounds of the Messe Berlin. On the fol­low­ing two days it will open up to a larg­er audi­ence.
A fly­er from the net­work is planned to give an overview of the net­work mem­bers exhibit­ing at the fair. If you are inter­est­ed in the fly­er, please con­tact us!

26.09.2018 — Annu­al Meet­ing 2018: Keep absolute­ly free! Our 3rd annu­al meet­ing (and in this course also the gen­er­al meet­ing of the net­work) this year takes place in Berlin.
This year’s speak­ers include: Prof. Dr. Sabi­na Jeschke, Chief Tech­nol­o­gy and Dig­i­tal­i­sa­tion Offi­cer of Deutsche Bahn and Christoph Hansen from Sauber Motor­sport.

16. — 18.10.2018IN(3D)USTRY in Barcelona. Our net­work sup­ports the third edi­tion of the largest trade fair for addi­tive man­u­fac­tur­ing in the Mediter­ranean region as a part­ner. Our mem­bers receive spe­cial con­di­tions for this. If you are inter­est­ed, please con­tact Ste­fanie Brick­wede.

We would also be hap­py to draw atten­tion to your spe­cial events. Please con­tact our Team for more infor­ma­tion. We are look­ing for­ward to see­ing you again soon, maybe at one of the events, and we will be broad­cast­ing until then.

Best regards, your
Mobil­i­ty goes Addi­tive Orga-Team