In his position as CEO of DB Fahrzeuginstandhaltung GmbH Gorden Falk represents the interests of Deutsche Bahn AG Group with more than 300,000 employees worldwide. From his perspective as a user, the main goal is to make components available as quickly as possible. Hence, he sees the vast potential of additive manufacturing above all in the supply of spare parts.
Prof. Dr.-Ing. Claus Emmelmann is heading the Institute of Laser and System Technologies at Hamburg University of Technology since the year 2001. With his team of researchers he is performing research and development in the field of laser additive manufacturing, ablation, cutting and welding as well as design and analysis of laser components and systems for automotive, shipyard, aircraft, tooling, polymer and medical industry.
As an author of more than 400 national and international publications, Prof. Emmelmann founded the LZN Laser Zentrum Nord GmbH in 2009 as a spin-off of the TUHH and is managing it since then.
The LZN transfers the latest research results from laser material processing in industrial applications and carries out research and development projects for leading technology companies such as Airbus, Audi, BMW, Cloos, Daimler, Siemens, Trumpf and VW.
Member of the board
Johannes Emmelheinz is CEO Customer Services of Siemens Mobility GmbH. After a study of biomedical technology at University Gießen he gained experience in medical and mobility industry for over 30 years.
“Additive Manufacturing (AM) is a decisive step in innovation. In the service we are enabled to have spare parts of small quantities both cost-effective and rapidly available for the entire lifetime of the product . We are able to revolutionize the logistics chains by printing the spare parts just on-site. In addition AM offers the opportunity to rapidly react with design corrections to weaknesses which were recognised in the course of operation.
Fazit: AM will lead to higher availability and lower total costs.”
Philip Janssen leads the production of DB Fahrzeuginstandhaltung GmbH, the full-service provider for maintenance of rail vehicles with 13 locations and about 7500 employees. In his job dwell-times in workshops are playing an important role and can be shortened with the use of additive manufacturing by quicker procurements of spare parts. There are also chances for sinking warehouse charges if components are produced as necessary.
With his background as a former management consultant and graduate in business administration Philip Janssen supports the network in an advisory role.
Studied plastics engineering in Darmstadt. 1999 joined the central research and development department of the DaimlerChrysler Group. Further positions at DELO Industrial Adhesives and the American aerospace group PPG Aerospace. At home in the world of additive manufacturing since 2013, first in the business development team of the Belgian company Materialise NV and since 2018 at the German mechanical engineering company EOS GmbH, where he was Senior Business Development Manager with global responsibility for business development in the service provider and emerging markets segment. In June 2020, he became Governmental Affairs Officer.
Dr. Jens Elzenheimer was born in Frankfurt/Main, is married and has 2 children. He studied mechanical engineering & administration at the TU Darmstadt and received his doctorate in the field of production technology. He joined Knorr-Bremse in 2015 as VP Operations at CoC Bogie Equipment. Since beginning of 2018, as VP “Production Rail” he has the global responsibility for production in the Rail Division.
The intensive contact with different players within AM ensures up to date information and allows the early identification of practical potential of this new technology. Knorr-Bremse is also involved in the joint development of standards for the rail industry, e.g. in the approval process.
Sonja Rasch is Sales Director and Business Developer serial production at Materialise.
With >20 years in AM she combines experience from many perspectives: science, material development, machine vendor, service bureaus, automotive industry and industrial goods.
In Materialise she is in responsible for solution providing in serial applications for all kind of industries, mainly aerospace, but also consumer, medical and production tooling.
Clever combinations with Materialise 3DP software lead to full digital-supply-chain projects and mass-customization-scan-to-print-solutions.
Dr. Andreas Leupold is working as a lawyer for companies from all over the world for more than 20 years with the main focus in the legal areas IT, new technologies, data protection, media, licenses and industrial property rights. As a trial lawyer in all instances for some very well-known companies and groups of companies, he has many years of legal practice. He is listed in the Handelsblatt list of the best business lawyers and in the Best Lawyers Germany List for information technology and media law. In 2016, his law firm Leupold Legal was awarded with the “Global Law Experts – 3D Printing Law Firm of the Year in Germany” Award and in 2017 it received the Corporate Intl Global Award “3D Printing Sector Law Firm of the Year Germany”.
For several years now, Dr. Leupold is working intensively on developments in the field of additive manufacturing and the associated legal requirements for companies. He gives lectures on industrial 3D printing & law and runs in-house workshops for management and legal departments in large companies. He is author of the guide “3D Druck, Additive Fertigung und Rapid Manufacturing” published by Verlag Franz Ahlen, and editor of the work for companies “3D Printing: Recht, Wirtschaft und Technik des industriellen 3D-Drucks”, which will be released in summer 2017 and in which authors from industry and legal sciences discuss the latest topics of 3D printing for companies. In addition, Dr. Leupold, together with Judge Silke Glossner, is editor of the munich lawyer’s guide for IT law published by C.H.Beck. Lawyer Dr. Andreas Leupold is founding member and advisory council of Mobility goes Additive e.V.
Gero Corman is responsible for 3D-Printing/Additive Manufacturing in the Group Digitalization of the 12 automotive brands of Volkswagen AG.
He has a Bachelor/Master degree in Mechanical Engineering and Business Administration from RWTH Aachen University. Gero Corman spent time at UC Berkeley and was a visiting scholar at the Massachusetts Institute of Technology. At MIT he conducted research in the field of energy and resource efficiency of Additive Manufacturing technologies.
After graduating, he joined the Boston Consulting Group where he was a core member of BCG’s Operations Center with a focus on Lean & Manufacturing. Later, he became BCG topic expert for 3D-Printing/AM.
Since the beginning of 2017, Gero Corman is part of the Digitalization team at the Volkswagen Group. Working now on a strategic level, he still enjoys designing and printing ideas with his 3D-printer at home.
For 26 years until the end of 2019 Klaus Roeser has been working for the Paul Schockemöhle group and since 2007 amongst others as managing director with Paul Schockemöhle Logistics GmbH & Co.KG (PSL). In this time he has been responsible for developing PSL into a modern, middle sized logistics company seated in the heart of the economically strong “Oldenburger Münsterland” in northwest Germany. Driven by a strong entrepreneurial approach, he is convinced about the importance of spotting disruptive potentials of 3D business models at an early stage and to act accordingly and decisive. He is active in transferring the 3D technology into the small and medium sized business sector in economically strong rural areas. Ever since he was a child and during military service, bank apprenticeship and his studies in business administration Klaus Roeser has been devoted to horses; these days in his role as chef d’équipe he is a strong pillar of the successful German national dressage team.
After studying business administration at the Friedrich-Alexander-University Erlangen-Nuremberg, Oliver Cynamon worked as a management consultant for ten years. For ten more years he held various positions in the printing and media industry as managing director and member of the board of directors and the executive board. He entered the 3D printing industry in 2013, founding a start-up brand for customizable, additively manufactured lifestyle products. In July 2017 he joined the FIT Additive Manufacturing Group. As managing director of FIT Production GmbH, he is responsible for the worldwide serial AM business while also leading the business development and marketing activities of the whole group.